Instant cement as material for leveling concrete floor which required high flatness level. With base elements of  cement, selected sand, filler and additive all of which homogenously mixed.

Advantages:

• Easy and ready to use, by water addition only.
• Fast working
• Practical and high adhesive power
• Floor would be flat/ level in a second

Application

MU-410 is used as a floor screed material surface that can’t be exposed and should be covered with floor material, such as: ceramic, granite, carpet, parquet and other materials.

How to Apply

Working equipment: spike roller, trowel, paddle, drill mixer, continuous mixer

Preparation

1. Prepare the area and surface. Clean the surface from dust and dirt.
2. Clean the surface by brushing with water, if needed
3. Unsmooth, holed or impaired surface should be repaired first with appropriate mortar products before applying MU-410

Mixing
Manual:

1. Pour 5.0 -5.5 liter of water for one 25-kg bag of MU-410.
2. Pour the dry mixture of MU-410 into mixing cart.
3. Mix the batter evenly with paddle drill mixer

Continuous mixer:

1. Prepare the continuous mixer on the working spot
2. Arrange the use of water until it was obtained measure that wanted. (5.0 – 5.5 liter)/25kg
3. Pour the mixture by using hose.

Application

1. Apply MU-410 as primary by using a brush and roll the paint on the surface of the floor that has been clean from the waste.
2. Wait for a moment until primary in the half dry condition
3. If the surface had a substrate porous, primary should be done in three times.
4. Pour the MU-410 mixture on the floor surface that already primer evenly.
5. Use spike roller to blotting out the air in MU-410 mixture.

Coverage

• MU-410 :
  1,8 kg powder / m2 / mm thick
• MU-410 P:
  5 m2 / liter for 2 times brush
  3 m2 / liter for 3 times brush