Choosing and achieving the right lighting for a home is no easy task, but with these few easy tips you can create the perfect atmosphere in an instant! Lighting is especially important for both creating a dramatic effect, but also will add warmth and style to any living area. There are numerous types of lighting available for all types of building, so be sure to read some of these examples.

Natural light in my opinion is the best form of light you can create in a room. Try and ensure you have large windows, which can allow the light to flood in easily. Light coloured paint and mirrors will help reflect this light all around the room, for a more enhanced light feel. For maximum effect, place a mirror opposite the window.

Your flooring will also improve the feeling of light in a room, carpets will hold the light, whereas varnish floorboards will reflect more light around any given room. Also replace any heavy dark curtains, with thinner, lighter tones or muslin.

Electric light is little trickier, as it is not natural so you have to be both subtle and clever with its use to create the best effect in any given room. Why not choose some light lamp shades to eliminate glare from the light. You can buy lights from most DIY stores or alternatively hire lighting if it is for a temporary decorative theme or special event.

You could even jazz up your lighting with coloured bulbs to add an unusual twist to a boring room.

Whatever your choices it can be quite simple to dramatically change the feel of a room in your home. With a little creativity and a little effort, your dream home can be made just that little better.

Instant cement as material for leveling concrete floor which required high flatness level. With base elements of  cement, selected sand, filler and additive all of which homogenously mixed.

Advantages:

• Easy and ready to use, by water addition only.
• Fast working
• Practical and high adhesive power
• Floor would be flat/ level in a second

Application

MU-410 is used as a floor screed material surface that can’t be exposed and should be covered with floor material, such as: ceramic, granite, carpet, parquet and other materials.

How to Apply

Working equipment: spike roller, trowel, paddle, drill mixer, continuous mixer

Preparation

1. Prepare the area and surface. Clean the surface from dust and dirt.
2. Clean the surface by brushing with water, if needed
3. Unsmooth, holed or impaired surface should be repaired first with appropriate mortar products before applying MU-410

Mixing
Manual:

1. Pour 5.0 -5.5 liter of water for one 25-kg bag of MU-410.
2. Pour the dry mixture of MU-410 into mixing cart.
3. Mix the batter evenly with paddle drill mixer

Continuous mixer:

1. Prepare the continuous mixer on the working spot
2. Arrange the use of water until it was obtained measure that wanted. (5.0 – 5.5 liter)/25kg
3. Pour the mixture by using hose.

Application

1. Apply MU-410 as primary by using a brush and roll the paint on the surface of the floor that has been clean from the waste.
2. Wait for a moment until primary in the half dry condition
3. If the surface had a substrate porous, primary should be done in three times.
4. Pour the MU-410 mixture on the floor surface that already primer evenly.
5. Use spike roller to blotting out the air in MU-410 mixture.

Coverage

• MU-410 :
  1,8 kg powder / m2 / mm thick
• MU-410 P:
  5 m2 / liter for 2 times brush
  3 m2 / liter for 3 times brush

Instant cement as adhesive for installation of brick work light (ALC) with a thickness of 3 mm. Based cement, sand choices, filler and additives are uniformly mixed.

Advantages:

* Easy to use and ready to use, just need to add water.
* High binding power and plastic when applied.
* Thinner mixture of species that efficient use of mortar.
* When the work more quickly, thus saving costs.
* The results of the work more evenly and more orderly.

Power Spread (Coverage)
* ALC 10 cm: ± 10 m2 / bags of 40 kg / mm 3
* 7.5 cm ALC: ± 16 m2 / bags of 40 kg / mm 3