Instant cement as material for leveling concrete floor which required high flatness level. With base elements of cement, selected sand, filler and additive all of which homogenously mixed.
Advantages:
- Easy and ready to use, by water addition only.
- Fast working
- Practical and high adhesive power
- Floor would be flat/ level in a second
Application
MU-410 is used as a floor screed material surface that can’t be exposed and should be covered with floor material, such as: ceramic, granite, carpet, parquet and other materials.
How to Apply
Working equipment: spike roller, trowel, paddle, drill mixer, continuous mixer
Preparation
- Prepare the area and surface. Clean the surface from dust and dirt.
- Clean the surface by brushing with water, if needed
- Unsmooth, holed or impaired surface should be repaired first with appropriate mortar products before applying MU-410
Mixing
Manual:
- Pour 5.0 -5.5 liter of water for one 25-kg bag of MU-410.
- Pour the dry mixture of MU-410 into mixing cart.
- Mix the batter evenly with paddle drill mixer
Continuous mixer:
- Prepare the continuous mixer on the working spot
- Arrange the use of water until it was obtained measure that wanted. (5.0 – 5.5 liter)/25kg
- Pour the mixture by using hose.
Application
- Apply MU-410 as primary by using a brush and roll the paint on the surface of the floor that has been clean from the waste.
- Wait for a moment until primary in the half dry condition
- If the surface had a substrate porous, primary should be done in three times.
- Pour the MU-410 mixture on the floor surface that already primer evenly.
- Use spike roller to blotting out the air in MU-410 mixture.
Coverage
- MU-410 :
1,8 kg powder / m2 / mm thick - MU-410 P:
5 m2 / liter for 2 times brush
3 m2 / liter for 3 times brush
